MarinaQuadro Luxe
Embedded with Firewall Protection, internal & external noise cancellation up to 20 decibels and Vier Pro technology it’s the jewel in our crown and can be used to craft the best quality luxury needs. It comes with a 200 % money back promise. Its Gurjan face makes it extra strong and gives double protection. It’s the best absorbent of sound and with E0 and CARB certifications it’s our safest yet.
Thickness (MM)
Sizes (MM)
Application
Borer & Termite Resistance
Glue Line Protection
Boiling Waterproof
Matt Finish
E-0 Emission Level
100% Calibrated
VierPro Technology
IS 10701
Fully Fire Retardant
Acoustically Effective
200% Lifetime Warranty
Bacterial & Fungal Proof
| SL NO. | Tests Method | ISI requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness | Length :+ 6mm Width :+ 3mm Thicknes :+/- 0.35 mm Max : 0.20% |
Length- 2442 Width- 1221 Thickness- 19mm Squareness - 0.08 |
| 2 | Moisture content | Moisture content should not be less than 5% and not more than 15% | 11.50% |
| 3 | Glue Adhesion in Dry State (a) Glue Shear Strength |
Avg.: 1350 N Minm Individual: Avg.: 1000 N |
1640 N 1380 N |
| (b) Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent |
Satisfactory | |
| 4 | Water Resistance Test (a) Glue Shear Strength |
Average : 1000 N Minimum Individual : 800 N |
1330 N 1190 N |
| (b) Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent |
Excellent | |
| 5 | Tensile Strength (a) Parallel to the grain direction |
Should not be less than 42.0 N/mm2 |
49*.14 N/mm2 |
| (b)Prependicular to the grain direction | Should not be less than 25.0 N/mm2 | 34.3 N/mm2 | |
| (c) Sum of both the direction | Should not bf less than 84.5 N/mm2 | 83.45 N/mm2 | |
| 6 | Mycological Test (a) Glue Shear Strength |
Average 1000 N Minimum lndividual : 800 N |
1340 N 1390 N |
| (b) Adhesion of Plies | Test piece shall show no appreciation signs of separation at the edges of the Veneers |
No appreciation sign of separat on at the edges of the veneers |
|
| 7 | STATIC BENDING STRENGTH ( DRY STATE ) | ||
| Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 7500 N/mm2 Min. lndividual-6700 N/mm2 |
9450 N/mm2 8240 N/mm2 |
|
| b) Across the grain of the Face Veneer | Average: 4000 N/mm2 Min. lndividual-3600 N/mm2 |
6500 N/mm2 5760 N/mm2 |
|
| Modulus of Rapture (a) Along the grains of the face Veneer |
Average: 50 N/mm2 Min. lndividual-45 N/mm2 |
69.7 N/mm2 61.8 N/mm2 |
|
| (b) Across the grain of the Face Veneer | Average: 30 N/mm2 Min. lndividual-27 N/mm2 |
56.1 N/mm2 53.7 N/mm2 |
|
| 8 | STATIC BENDING STRENGTH ( WET STATE ) | ||
| Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 3570 N/mm2 Min. lndividual- 3400 N/mm2 |
5730 N/mm2 34970 N/mm2 |
|
| b) Across the grain of the Face Veneer | Average: 2000 N/mm2 Min. lndividual-1800 N/mm2 |
4510 N/mm2 3970 N/mm2 |
|
| Modulus of Rapture (a) Along the grains of the face Veneer |
Average: 25 N/mm2 Min. lndividual-22 N/mm2 |
39.6 N/mm2 34 N/mm2 |
|
| (b) Across the grain of the Face Veneer | Average: 15 N/mm2 Min. lndividual-13 N/mm2 |
37.9 N/mm2 35.6 N/mm2 |
|
Download the brochure for more information