Timba 710
Built gap-free with non-overlapping layers, it comes with an 11-year peace of mind warranty. Made from selected hardwood species and 100 % composed core, Timba 710 is MUF resin ply. Owing to the least formaldehyde emissions (E1 level), it promises no teary eyes or breathing suffocation. Furthermore, it provides total protection against termites, borers and fungus ensuring a long hassle-free life for your home and office furniture.
Thickness (MM)
Sizes (MM)
Application
Borer & Termite Resistance
Emission Level-E1
Matt Finish
11 Years Warranty
VierPro Technology
MUF - Glue Line Protection
| SL NO. | Tests Method | ISI requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness | Length :+ 6mm Width :+ 3mm Thicknes : +/- 5 mm Max : 0.2% |
Length- 2442 Width- 1221 Thickness- 19mm Squareness - 0.13 |
| 2 | Moisture content | Moisture content should not be less than 5% and not more than 15% | 9.4% |
| 3 | Glue Adhesion in (a) Dry State |
Minmum Individual: 1100 Avg.: 1350 N |
1401 N |
| (b) Wet Strength | Minm Individual: 800 N Avg.: 1000 N | 1110 N | |
| (c) Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent | Satisfactory | |
| 4 | Glue Adhesion & Water Resistance Test (cyclic test followed by knife test: A cycle of 8 hrs. submerged at 60℃ +/-2 ℃ and 8 hrs. drying at 65℃ +/- 2 ℃) | After 4 cycles | Satisfactory |
| 5 | Tensile Strength (a) Parallel to the grain direction |
Should not be less than 42.0 N/mm2 |
45.6 N/mm2 |
| (b) Prependicular to the grain direction | Should not be less than 25.0 N/mm2 | 31 N/mm2 | |
| (c) Sum of both the direction | Should not bf less than 84.5 N/mm2 | 84.63 N/mm2 | |
| 6 | Mycological Test (a) Glue Shear Strength |
Average 1000 N Minimum lndividual : 800 N |
Satisfactory |
| (b) Adhesion of Plies | Test piece shall show no appreciation signs of separation at the edges of the Veneers | Satisfactory | |
| 7 | Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 7500 N/mm2 Min. lndividual-6700 N/mm2 |
8070 N/mm2 7360 N/mm2 |
| (b) Across the grain of the Face Veneer | Average: 4000 N/mm2 Min. lndividual-3600 N/mm2 |
4270 N/mm2 3980 N/mm2 |
|
| 8 | Modulus of Rapture (a) Along the grains of the face Veneer |
Average:50 N/mm2 Min. lndividual-45 N/mm2 |
55.1 N/mm2 48.5 N/mm2 |
| (b) Across the grains of the Face Veneer | Average: 30 N/mm2 Min. Individual-27 |
30.9 N/mm2 29.5 N/mm2 |
Download the brochure for more information