Timba Gold MR
MR grade plywood, made with 100% hardwood. It is most suited panel for interior furniture, wardrobe, office cabinets etc with El emission. It offers immunity against termite & borer.
Thickness (MM)
Sizes (MM)
Application
IS 303
Matt Ply
Borer Proof & Termite Resistant
Calibrated
Low Emission
100% Harwdwood
| SR NO. | Tests Method | ISI Requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness | Length :+ 6mm Width :+ 3mm Thicknes : +/- 5% Max : 0.20% |
Length- 2441 mm Width- 1221 mm Thickness- 18 mm Squareness - 0.14% |
| 2 | Moisture content | Moisture should not be less than 5% and Do not more than 15% | 7.5% |
| 3 | Glue Adhesion & Water Resistance Test (cyclic test followed by knife test: A cycle of 3 hrs. submerged at 60℃ +/-2 ℃ and 8 hrs. drying at 65℃ +/- 2 ℃) |
After 3 cycles | Satisfactory |
| 4 | Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 4000 N/mm² Min. lndividual-3600 N/mm² |
4355 N/mm² 3780 N/mm² |
| (b) Across the grain of the face Veneer | Average: 2000 N/mm² Min. lndividual-1800 N/mm² |
2190 N/mm² 2040 N/mm² |
|
| 5 | Modulus of Rupture (a) Along the grains of the face Veneer |
Average:30 N/mm² Min. lndividual-27 N/mm² |
34 N/mm² 29 N/mm² |
| (b) Across the grain of the face Veneer | Average: 15 N/mm² Min. Individual-13 |
18 N/mm² 13.9 N/mm² |
Download the brochure for more information