Timba Gold 710
Built gap-free with non-overlapping layers, it comes with a 11-year "Peace of mind" warranty. Made from selected hardwood species and 100% composed core, Timba 710 is MUF resin ply. Owing to least formaldehyde emissions (El Level), it promises no teary eyes or breathing suffocation. Furthermore, it provides total protection against termites, borer, and fungus, ensuring a long, hassle-free life for your home and office furniture.
Thickness (MM)
6 MM, 8 MM, 12 MM, 15 MM, 18 MM, 25 MM
Sizes (MM)
2440 MM X 1220 MM
2135 MM X 1220 MM
1830 MM X 1220 MM
Application
Glue Line Protection
Emission Level-E1
Matt Ply
Fully Calibrated
15 Years Warranty
Fully Borer & Termite Proof
Water Proof Plywood
MFG IN ACC. To 710
| SR NO. | Tests Method | ISI Requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness | Length :+ 6mm Width :+ 3mm Thicknes : +/- 5% Max : 0.20% |
Length- 2442 mm Width- 1221 mm Thickness- 19 mm Squareness - 0.13% |
| 2 | Moisture content | Moisture content should not be less than 5% and not more than 15% | 9.4% |
| 3 | Glue Adhesion in (a) Dry State |
Minimum Individual: 1100 Avg.: 1350 N |
1401 N |
| (b) Wet Strength | Min. Individual: 800 N Avg.: 1000 N | 1110 N | |
| (c) Adhesion of Plies | Bond shall show minimum pass Standard, Poor or Excellent | Satisfactory | |
| 4 | Glue Adhesion & Water Resistance Test (cyclic test followed by knife test: A cycle of 8 hrs. submerged at 60℃ +/-2 ℃ and 8 hrs. drying at 65℃ +/- 2 ℃) |
After 4 cycles | Satisfactory |
| 5 | Mycological Test (a) Glue Shear Strength |
Average 1000 N Minimum lndividual : 800 N |
Satisfactory |
| (b) Adhesion of Plies | Test piece shall show no appreciation signs of separation at the edges of the Veneers | Satisfactory | |
| 6 | Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 5000 N/mm² Min. lndividual-4500 N/mm² |
5534 N/mm² 4850 N/mm² |
| (b) Across the grain of the face Veneer | Average: 2500 N/mm² Min. lndividual-2200 N/mm² |
2800 N/mm² 2630 N/mm² |
|
| 7 | Modulus of Rupture (a) Along the grains of the face Veneer |
Average:40 N/mm² Min. lndividual-36 N/mm² |
45 N/mm² 39 N/mm² |
| (b) Across the grain of the face Veneer | Average: 20 N/mm² Min. Individual-18 |
22 N/mm² 20 N/mm² |
Download Catalogue
Download the brochure for more information