Timba 303
MR Grade plywood is made with 100% hardwood. It is the most suited panel for interior furniture, wardrobe, office cabinets etc. with E1 emission. It offers immunity against termites and borers.
Thickness (MM)
Sizes (MM)
Application
Moisture resistance
IS 303
Borer & Termite Resistance
Selected Hardwood
Glue Line Protection
7 Years Warranty
E1 Emission
| SL NO. | Tests Method | ISI requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness |
Length: 6mm Width: +3mm Thickness : +/- 5 mm Max: 0.2% |
Length- 2441 Width- 1221 Thickness- 18 mm Squareness - 0.14 |
| 2 | Moisture content | Moisture should not be less than 5% and Do not more than 15% | 7.5% |
| 3 | Glue Adhesion in a)Dry State b) Wet Shear Strength |
Minmum Individual: 1100 Avg.: 1350 N Minm Individual: 800 N Avg.: 1000 N |
1230 N 1440 N 870 N 1080 N |
| b)Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent | Satisfactory | |
| 4 | Tensile Strength a) Along the Grain |
Should not less then 42 N/mm2 |
45.6 N/mm2 |
| b) Across the Grain | Should not less then 25 N/mm2 |
30 N/mm2 | |
| 5 | Glue Adhesion & Water Resistance Test (cyclic test followed by knife test: A cycle of 3 hrs. submerged at 60℃ +/-2 ℃ and 8 hrs. drying at 65℃ +/- 2 ℃) | After 3 cycles | Satisfactory |
| 6 | Modulus of Elasticity a) Along the grains of the face Veneer |
Average: 4000 N/mm2 Min. lndividual-3600 N/mm2 |
3780 N/mm2 4355 N/mm2 |
| b) Across the grain of the Face Veneer | Average: 2000 N/mm2 Min. lndividual-1800 N/mm2 |
2040 N/mm2 2190 N/mm2 |
|
| 7 | Modulus of Rapture a) Along the grains of the face Veneer |
Average: 30 N/mm2 Min. lndividual-27 N/mm2 |
34 N/mm2 29 N/mm2 |
| b) Across the grain of the Face Veneer | Average: 15 N/mm2 Min. Individual-13 |
18 N/mm2 13.9 N/mm2 |
Download the brochure for more information